Digital Ultrasonic Thickness Gauge Meter 0.75-300mm (Depends on Probes)

  • Model: M00035
Qty :


  • Suitable for measuring metal (such as steel, cast iron, aluminum, copper, etc.) , plastics, ceramics, glass, fiber glass and any other good ultrasonic conductors;
  • Dual straight beam probes with different frequencies and crystal sizes are available;
  • Zero calibration, two-point calibration, automatic error correction system;
  • EL backlight for easy use in dimly lit environments;
  • Remaining battery indicator can display the remaining power in real time;


  • Measuring Range:0.75-300mm (Depends on probes)
  • Working Frequency:(2.5-7)MHZ
  • Probe Diameter:Standard N05 is10MM、Probe N07 is 6MM、Probe HT5 is12MM、Probe N02 is12MM. N05 is standard probe, others are optional
  • Min. Pipe Diameter:Φ15mm×2.0mm
  • Resolution:0.1mm/0.01mm
  • Accuracy:±(0.5%Thickness+0.04)mm,depends on probes
  • Display:4.5 digits LCD with EL backlight
  • Single /Scan Mode:Four measurements readings per second for single point measurement, and ten per second for Scan Mode
  • Probe Calibration:Zero Calibration, Two-Point Calibration
  • Velocity Range:1000-9999m/s
  • Unit:Metric/Imperial unit selectable
  • Memory:up to 20 files (up to 99 values for each file) of stored values
  • Communication Port:USB
  • Data Printing:YES
  • Power supply:Two “AA” size, 1.5 Volt alkaline batteries
  • Working Hours:100h (EL backlight off).
  • Operating Temperature:-20℃-+60℃,Relative Huminity:≤90%